Conplan Eco VR is a fibre-reinforced, rapid-drying compound for levelling over heating cables, when there is insufficient space for normal concrete casting or reinforcement net. This is a dual registered EPD from the system by the Norwegian EPD…
The concretes covered under EPD Registration Number S-P-00555 include all Normal (as defined in NZS 3104:2003) Standard and Pump grade concretes from 17.5 MPa to 50 MPa, batched by Allied Concrete using cement manufactured by Holcim Cements Westport…
Laminated safety and security glass, SGG STADIP, comprises two or more sheets of glass bonded together with one or more interlayers of polyvinyl butyral (PVB) film. It is meant to be used in building, furniture and industrial applications. …
This Environmental Product Declaration (EPD) covers the environmental impacts of reinforcing bar and mesh. Reinforcing bar and mesh is manufactured to AS/NZS 4671 Steel reinforcing materials. This EPD is valid for a declared unit of one tonne (t) of…
This Environmental Product Declaration (EPD) covers the environmental impacts of 1 tonne of OneSteel manufactured reinforcing rod, bar and wire products. These products are manufactured to the following Australian Standards and generally used in the…
Officina dellAmbiente S.p.A, located in the municipality of Lomello (PV) in Italy, performs the treatment and recovery process of special hazardous and non-hazardous wastes, mainly bottom ashes derived from municipal incineration plants. …
XLERPLATE steel is a steel plate product manufactured by BlueScope at Port Kembla, NSW, Australia, to standards AS/NZS 3678:2011 Structural steel – hot-rolled plates, floorplates and slabs and AS 1548:2008 Fine-grained, weldable steel plates…
Solid precast concrete products come in many different varieties, most of which are custom made for each project. If the customer wish, the products can be completed with conduits for electrical wires or plumbing. This, however, is not included in…
Hot rolled steel-plate is a sheet steel supplied directly from the hot-rolling mill or with cut edge. Hot rolled steel-plate is available in thicknesses from 0.312inc (7.92 mm) to more than 2inc (50.8 mm) with widths from 56inc (1 422.4 mm) up to…
AHMSA offers profiles of hot rolled steel: beam, wide skid profiles; angle, profiles of equal and unequal skids; channel, profiles with variable skate inner surface for various applications in the construction industry. Main uses of structural…
